INDUSTRIAL GRADE PROTECTION
Stop Leaks, Slash
Costs
HydroTEK high-solids silicone creates a seamless monolithic barrier that permanently halts water intrusion while reflecting 88% of solar heat to drastically reduce facility cooling loads.
20-Year Product Warranty · Non-Invasive Application · Fast ROI
CRITICAL ROOF DEGRADATION RISK
The True Cost
Of Waiting
Every summer afternoon, unshielded commercial roofs endure extreme thermal expansion, swelling under blistering UV exposure before contracting violently as night falls. Over just 36 months, this continuous cycle turns microscopic fractures into catastrophic leaks, rotting underlying deck insulation and silently driving up energy bills.
- Full Tear-Off Financial Drain: Complete replacement costs 3x-4x more and forces costly operational shutdowns.
- Rapid UV Membrane Decay: Standard bitumen and EPDM dry out, crack, and fail at seams within 5 to 7 years.
- HydroTEK Monolithic Shield: High-solids silicone creates a permanent, seamless barrier over your existing substrate.
- Same-Year Tax Advantage: Classified as commercial maintenance rather than a 39-year depreciated capital expense.
TECHNICAL SPECIFICATIONS // 4-POINT BLUEPRINT
Engineered For
Extremes
Laboratory-verified performance ratings calibrated for severe UV exposure, standing ponding water, and punishing thermal cycling.
SPEC 01 // HYDRO-LOCK
100%
Waterproofing
Monolithic silicone barrier withstands continuous hydrostatic ponding with zero moisture penetration or seam failure.
SPEC 02 // PHOTO-STABILITY
90%
UV Rejection
Inorganic polymer backbone deflects 90% of solar radiation, preventing chalking, surface embrittlement, and micro-fissuring.
SPEC 03 // ALBEDO-MAX
SRI 112
Solar Reflectance
High-emissivity albedo rating disperses solar heat absorption, reducing peak industrial roof deck temperatures by up to 50°F.
SPEC 04 // CRYO-FLEX
20-Year
Weather Armor
Elastomeric tensile strength retains complete flexibility across severe -40°F to 200°F freeze-thaw thermal shock cycles.
TURNKEY FACILITY UPGRADE
The Full-Armor
Package
Engineered not simply as a topical coating, but as an end-to-end monolithic membrane installation. We restore industrial assets to zero-leak, high-reflectance performance without tenant interruption or costly tear-offs.
01
PHASE
Infrared Diagnostic & Structural Site Audit
Every project begins with a non-destructive FLIR thermal scan and core sampling to detect trapped moisture, fastener corrosion, and seam compromise before coating spec confirmation.
02
PHASE
Hydro-Washing, Seam Stitching & Priming
3,500 PSI industrial wash cycle removes organic buildup and calcification. Critical stress points, mechanical flashings, and fasteners are encapsulated with high-tensile mesh tape before epoxy-bonding primer application.
03
PHASE
High-Solids Seamless Silicone Application
Precision airless hydraulic spray distributes HydroTEK 96% solids silicone at a certified dry film thickness (DFT). Cures in humidity to form a continuous elastomeric seal impervious to standing water.
Includes comprehensive thermal imaging & core substrate report at zero obligation.
PROJECT PORTFOLIO
Proven Across
Scale
Engineered silicone protection adapted for high-stress industrial rooftops, busy retail properties, and sprawling multi-unit complexes. Discover seamless climate resilience and thermal deflection verified under extreme operational demands.
01 Commercial Logistics • 02 Regional Retail Hubs • 03 Multi-Family Residential
TAKE ACTION
Secure Your
Evaluation
Book your zero-obligation technical roof evaluation immediately. Our licensed commercial specialists perform advanced moisture mapping and membrane assessment to safeguard your facility against catastrophic structural failure.
- Complete infrared moisture analysis and membrane condition review
- Comprehensive engineering report delivered within 48 business hours
- Direct qualification for 20-year renewable HydroTEK leak-free warranty
ISO 9001 Compliant Inspection Protocols : Zero Sales Pressure Guarantee
Initiate Facility Evaluation
Direct dispatch of certified commercial field engineers.
Evaluation Request Confirmed
Your facility data has been assigned to a Senior Diagnostic Specialist. You will receive priority scheduling within 2 hours.
HydroTEK engineers monolithic silicone restoration systems that turn commercial roofs into permanent, heat-reflective protective shields.
CRRC Rated Product
License #HT-8849-COMM
Service Solutions
High-Solids Silicone Coatings
Commercial Membrane Sealing
Solar Reflectance Optimization
Zero-Downtime Application
Facility Energy Auditing
Ponding Water Defense
Certified Assurance
20-Year Monolithic Warranty
Full material & workmanship backing tailored for commercial facility owners.
Direct Engineering Line:
+1 (800) 555-4937
[email protected]
Copyright © 2026 HydroTEK Performance Roofing. All Rights Reserved. ISO 9001 Certified & Energy Star Partner.